|
Use the DVIE-101 transmitter and receiver from Databay to extend DVI-D digital display information from a PC over CAT5/5e/6 UTP cable to remote digital displays such as plasma and LCD screens and projectors. For distances up to 100m. use the DVIE-101R long-haul Receiver. For shorter distances up to 10m. use the lower cost DVS-DR Receiver. Actual distances are dependent on display resolution and UTP cable type and characteristics.
The DVI-over-CATx transmitter and receivers are simple to install and require no set-up and only minimum or no adjustment. The system is designed for use with dedicated CATx UTP cabling. It will not work on a pre-existing data network with data switches, hubs, routers, etc. All CATx cable terminations must be made to the EIA-568B connection standard as detailed in the user manual.
See the Databay Installation guide and FAQs
Download the DVI-over-CATx extender user manual. 430K pdf
DVIE-101 Connections - Click on image for enlarged view
|
DVIE-101T Transmitter enables the DVI-D digital display output from a PC to be transmitted over CAT5/5e/6 UTP cable to the DVIE-101R Receiver at up to 100m. distance or to the DVS-DR Receiver at up to 10m. distance.
Input: DVI-D male.
Outputs: RJ-45
Power consumption: 5VDC, 250mA
Dimensions: 68 x 42 x 19mm |
|
|
DVIE-101R Receiver (long haul)
Receives and decodes DVI-D signals from the DVIE-101T Transmitter at the following resolutions and distances:
800 x 600 @ up to 100m.
1024 x 768 @ up to 70m.
1280 x 1024 @ up to 60m.
1920 x 1200 @ up to 35m.
Input: RJ-45
Outputs: DVI-D female
Equalization control.
Power consumption: 5VDC, 250mA
UK and Euro power supplies available.
Dimensions: 68 x 113 x 29mm |
|
|
DVS-DR Receiver (short haul)
Receives and decodes DVI-D signals from the DVIE-101T Transmitter at 1280 x 1024 @ up to 10m. range.
Input: RJ-45
Outputs: DVI-D female
Dimensions: 55 x 42 x 19mm |
|
|
DVS-AR audio-over-telephone line balun. Use a pair (2) of these baluns to extend line-level stereo audio from a PC or audio system up to 50m. using low cost 4-wire telephone cable and RJ-11 plugs (not supplied).
Unbalanced line-level stereo audio input / output: 3.5mm jack plug
Balanced output / input: RJ11 socket
Max. distance: 50m.
Dimensions: 18 x 20 x 90mm
Sold separately. |
|
|
